Page 1

Home
Journeys  

I installed the shifting controls about 2 inched closer to the cabin than Kilburn suggested because for me it worked better for my arm length. Then when I started to position and install the bimini in the forward position I noticed that shifting into reverse would just hit the bimini bar so I moved the bimini block back two inches. So I just luck out.

The black material I used for the anchor locker in the bow is a material used for catamaran trampolines. It is very strong and light.

When I go for longer trips I have two 28 qt. ice chests. One is under the cockpit seat on the port side and the other is located in the port side engine well area.

I painted to just below the 1/4 inch roof plywood. I just liked the look after I started painting the roof and the 1/4 edge.